Service Wharf
 |
 |
 |
General Information
-
Petroleum products are imported over this facility
-
The Wharf consists of steel sheet pile cells constructed in water of surrounding depths of 6.51m LAT
-
The berthing basin is 243.8m long and 38.1m wide and has been dredged to a depth of 6.7m LAT on the western side
-
The whard is 69.5m in length and faced with piles on which are secured rubber fenders
-
Mooring buoys are positioned on the north eastern and south western extremity of the wharf and head and stem lines are secured to these buoys
-
Generally ships berth port side to this facility
Principal Dimensions
-
Length is 69.5m with mooring buoys off each end
-
Berthing Basin length is 243.8m; width is 38.1m and depth is 6.7m
-
Tankers delivering oil products are also accommodated
-
Bunkers and GO - 200mm pipeline
-
Fuel oil - 350mm pipeline
-
Both lines 3 x 200mm hoses
Restrictions
- Approach depth of 6.4m and 6.7m at the berth itself
- SDWT at statutory freeboard draft of 47,000 tonnes centre manifold of 92m
- Maximum beam is 32.2m
- Berth depth is 6.7m = 1.0m UKC at all times
